Instruction manual

16
CITIZEN SYSTEMS JAPAN CO.,LTD.
[Olmec OP900 Printer Driver] Instruction Manual for Windows 7
DualImage
With the OP900, it is possible to split A5W(6x9), A5(6x8) media into 2 PC size images and print them.
Dual image printing can be done under the following conditions.
1. A5W or A5 media is set in the printer.
2. The paper size setting in the printer driver is set to “PC”, and the dual image setting should be “ON”.
3. Multiple images are sent from the application.
Note）The dual image setting works on a job basis, so multiple pages can be printed in one job.
The printer will print 2 images at once, and the paper will be cut as it exits the printer.
This takes place for each dual image. In the case of an odd number of images, the last image will come out as a PC
size photo. However, an A5W or A5 portion of the ribbon will be used.
<Example of Application Use>
This is an example using Windows Explorer
Prints 2 PC size photos on 1
A
5W(6x9) or A5(6x8) size sheet
Cut as paper is sent out
Fig 2.2.2.3 Dual Layout image
Step 1. Select 2 or more images⇒Click “Print”.
Step 2. Check “Fit picture to frame” and click “Options…”.
Select 2 or more images
Step 3. Click on “Printer Properties…”.
Step 4. Click on “Advanced”.