Printer User Manual
Table Of Contents
- WEEE MARK
- Declaration of Conformity
- GENERAL PRECAUTIONS
- SAFETY PRECAUTIONS
- THE TABLE OF CONTENTS
- 1. GENERAL OUTLINE
- 2. EXPLANATION OF PRINTER PARTS
- 3. SETUP
- 3.1 Connecting the AC Power Cord
- 3.2 Connecting Interface Cables
- 3.3 Connecting the Cash Drawer
- 3.4 Precautions for Installing the Printer
- 3.5 Partition for Paper Roll
- 3.6 Setting the DIP Switch on the Serial Interface Board
- 3.7 Adjusting the Paper Near-end Sensor
- 3.8 Loading Paper
- 3.9 Attaching the Power Switch Cover
- 3.10 Attaching the Interface Cover
- 3.11 Removing the Interface Cover
- 4. MAINTENANCE AND TROUBLESHOOTING
- 5. OTHER
—9—
The CT-S651 line thermal printer series is designed for use with a broad array
of terminal equipment including data, POS, and kitchen terminals.
These printers have extensive features so they can be used in a wide range of
applications.
z High-speed (200 mm/s) printing
z Design so compact it can be installed anywhere (maximum 3-inch (83-mm)
paper roll size)
z Waterproof construction prevents water from entering through the top
z Paper is output from the front so the printer can be placed in restricted spaces
z Choose from two models with either 3-inch (83/80 mm) or 2-inch (60/58 mm)
wide paper rolls
z Built-in power supply or AC adapter types available
z Printer status and errors indicated by LED and a buzzer
z Equipped with a fast and quiet cutter
z Easy to clear cutter jams
z Interchangeable interface
z Built-in cash drawer kick-out interface
z Memory switches make customization possible
z Store user-defined characters and logos on user memory
z Barcode and 2D barcode printing supported
z 2-color printing supported (when specified paper used)
z Driver and utility software included
1. GENERAL OUTLINE
1.1 Features