Specifications

- 92 -
• Setting memory switch 2 (a = 2)
n
b (Set
Value)
Function
1 49 (Default) Reserved
2 48 (Default) Reserved
48 (Default) Disables stored printing.
3
49 Enables stored printing.
48 Line feed immediately at full column width printing
4
49 (Default) Wait for data at full column width printing
48 (Default) After cover close and PE recovery, prints as it is.
5
49
After cover close and PE recovery, prints from the beginning
using PAGE MODE, barcode, image, double-height printing,
etc. as a unit.
6 49 (Default) Reserved
7 48 (Default) Reserved
48 (Default) Enables PNE.
8
49 Disables PNE.
• Setting memory switch 3 (a = 3)
n
b (Set
Value)
Function
1 48 (Default) Reserved
2 48 (Default) Reserved
48 (Default) Resets with parallel pin 31.
3
49 Does not reset with parallel pin 31.
4 48 (Default) Reserved
5 48 (Default) Reserved
6 48 (Default) Reserved
48 (Default) Enables CBM270 compatible mode.
7
49 Disables CBM270 compatible mode.
48 (Default)
Printer automatically clears error when it detects that the
cover is closed.
8
49
Printer clears error when it receives a command
<DLE+ENQ> after detecting that the cover is closed.