User`s manual

— 13 —

EXPLANATION OF PRINTER PARTS

2.1 Printer Appearance

Operation panel cover

Manual cutter

(CT-P290/CT-P292 only)

Case

(Front view) (Rear view)

●Front cover

Opened or closed in the case of paper handling, paper jam, etc.

● Manual cutter(CT-P290/CT-P292 only)

Used when cutting paper. (If the paper length is short, cutting remainder

may present.)

●Case

Internal mechanism is covered with the case. Do not apply excessive force.

● Operation panel cover

Opened or closed when changing the DIP switch setting.

● Operation panel

Provides LED indication of the printer status. The FEED button allows paper

feeding.

● USB interface (Optional)

Use a mini-B type connector.

1.5 Power Supply Used

Power supply that can meet these specifications shall be prepared.

The power supply shall be capable of supplying DC 24 V ±10%, 1.2 to 2.1A

(9A or more at peak).

If power capacity is below 6A to 9A at peak, low current consumption mode

is recommended (DIP switch No. 7 to ON).

CAUTION!

■ Avoid using power supply having excessively high current capacity.

Operation

panel

Front cover

USB interface

(Optional)

Interface

FG terminal

Power connector board (AT type)

Mounting

attachment