Service manual

CT-292/293 Series Service Manual

- 5 -

1-2. Disassembly Procedure

1-2-1. Disassembling the Printer

1. Disassembling “COVER, OPE-PANE”

Press in the lugs on the right and left at “COVER, OPE-PANE” and remove “COVER, OPE-PANE”

toward you.

Engage the lugs at “COVER OPE-PANE” to “CASE L”.

Try to pull “COVER OPE-PANE” toward you to check that it is securely fitted.

2. Disassembling “CASE L”

Remove two “SCREW, PHT (ST#3), M3.0 × 6” that fasten “SA, FRAME BASE”, and pull it toward you

while holding the both edges of “SA, DOOR FRONT”.

When reassembling “CASE L”, put it smoothly without hitch.

If it cannot be inserted smoothly, pull it toward you and insert it back again.

Check that the metallic part comes into view through the holes at “CASE L”.

Lugs

COVER, OPE-PANE

SCREW, PHT (ST#3), M3.0 × 6

Metallic parts

SA, DOOR FRONT