Service manual

CT-292/293 Series Service Manual
- 14 -
Remove “SCREW BHT (ST), M2.0 × 4” that fastens “SA, F BLADE STAY” and “F-BLADE”.
<Precaution at reassembly>
Align the bosses at “F BLADE STAY” with the holes at “SA, FRAME BASE”. Check the orientation of
“F-BLADE”.
7. Disassembling “HEAD ASSY”
Remove “HEAD ASSY” while pulling the side edges at “SA, FRAME BASE” outwardly and keeping it
clear of “HEAD SPRING”.
<Precaution at disassembly / reassembly>
When disassembling, be careful not to loose “HEAD SPRING”. When reassembling, mount “HEAD ASSY”
first and “SA, BLADE STAY” next. Then insert two “HEAD SPRING”. Check that “HEAD ASSY” is correctly
inserted into “SA, FRAME BASE” and that the bosses at “HEAD ASSY” are located inside “HEAD SPRING”.
Align the bosses.
Auto-cutter model (CT-P293) only
HEAD ASSY
HEAD SPRING
Insert “HEAD ASSY”
into the window hole.
Check the bosses at
“HEAD ASSY”.