Service manual

CT-292/293 Series Service Manual
- 13 -
5. Disassembling “SA, LEVER PLATEN L & R”
Remove two “E-RING, 2.0” from the right and left sides of “FRAME, FRONT DOOR”.
<Precaution at reassembly>
Be sure to assemble “SA, LEVER PLATEN” in a correct orientation.
6. Disassembling “SA, F BLADE STAY”
Remove two “SCREW, PHT (ST#3), M3.0 × 6” that fasten “SA, FRAME BASE” and “SA, F BLADE
STAY”.
<Precaution at reassembly>
Align the bosses at “SA, F BLADE STAY” with the holes at “SA, FRAME BASE”.
AUTO CUTTER (CT-P293) DUMMY, CUTTER FLAME (CT-P292)
Paper guide
Paper guide
Left side
Right side
SCREW, PHT (ST#3), M3.0 × 6
Align the bosses.