Service manual

CT-292/293 Series Service Manual
- 10 -
Detach the boss at “SA, FRAME BASE” from “FRAME, FRONT DOOR” while pulling “FRAME, FRONT
DOOR” outwardly.
Detach two lugs that fasten “GUIDE FRONT DOOR”.
Detach two lugs from the right and left sides of the platen roller.
<Precaution at disassembly / reassembly>
For the auto-cutter model, the cable is secured with the hook at “GUIDE FRONT DOOR”. When removing
the cable, remove it while pushing the hook in the arrow direction. When attaching the cable, make it flat
and insert it into the hook while pulling the cable toward the connector side to avoid slack on the cable.
Auto-cutter model (CT-P293) only