Operation Manual

— 30 —
Switch No. Setting 0 (OFF) 1 (ON)
Memory SW5-1 Reserved Fixed
SW5-2 Reserved Fixed
SW5-3 Reserved Fixed
SW5-4 Reserved Fixed
SW5-5 Reserved Fixed
SW5-6 Speed/Quality Speed priority Quality priority
SW5-7 Reserved Fixed
SW5-8 Reserved Fixed
Switch No. Setting Default Set Values
Memory SW7-1 Baud Rate 9600 bps 1200 bps, 2400 bps, 4800 bps, 9600 bps,
19200 bps, 38400 bps, 57600 bps
SW7-2 Data Length 8bits 7bits, 8bits
SW7-3 Stop Bit 1bit 1bit, 2bits
SW7-4 Parity NONE NONE, EVEN, ODD
SW7-5 Flow Control DTR/DSR DTR/DSR, XON/XOFF
SW7-6 Reserved - -
SW7-7
VCom Protocol
PC Setting PC Setting, DTR/DSR, XON/XOFF
Memory SW9-1 Code Page PC437 PC437/Katakana/PC850,858/PC860/PC863/
PC865/PC852/PC866/PC857/WPC1252/
Space page/PC864/Thai Code 18
SW9-2 Int’ char Set U.S.A U.S.A, France, Germany, England, Denmark,
Sweden, Italy, Spain, Japan, Norway,
Denmark 2, Spain 2, Latin America, Korea,
Croatia, China
SW9-3 Kanji OFF ON, OFF
SW9-4 JIS/Shift JIS JIS JIS, Shift JIS
Memory SW10-1 Print Density 100% 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
110%, 115%, 120%, 125%, 130%, 135%, 140%
SW10-2 Print Speed Level 9 Level 1, Level 2, Level 3, Level 4, Level 5,
Level 6, Level 7, Level 8, Level 9
SW10-3 Reserved - -
Memory SW (1) 00000000
0: OFF state
1: ON state
(No indication for 0/1 with memory switch 7 through 10)
Manual Setting of Memory Switch (Memory SW)
The memory switch can be selected, changed, or written by the combination of
three actions: pressing the FEED button, pressing and holding the FEED button,
and opening or closing the front cover.
1. Entering memory switch setting mode.
Set paper to the printer and keep the front cover open. With the FEED
button pressed and held, turn the printer power on, and then press the
FEED button twice. Close the cover. If the current settings of the memory
switch etc. are printed, the printer is now in the memory switch setting
mode.