Operation Manual

— 14 —
● Interface
Attached power cord and wiring cable are connected.
● FG terminal
The printer frame is connected to ground. Be sure to keep this wiring.
● Mounting attachment
A metal attachment for mounting the printer in a rack or the like.
● Power connector board
Used for connecting the AC adapter.
2.2 Front Cover Inside
See 5.4 Specifications of Power Supply and Interface Connectors
● Paper holder
A place where thermal paper roll is set.
● Paper adjust guide
Adjusts this guide to meet the paper width to be set.
●Paper guide
Thermal paper roll is set and held.
● Auto cutter fixed blade
Used for cutting paper.
● DIP switch
Allows various kinds of setting.
● Thermal head
Prints characters and/or graphic data on thermal paper.
● Platen
Feeds paper while pressing the thermal paper onto thermal head.
● Auto cutter (CT-P292/CT-P293)
Cuts the paper with a command at the end of printing. Cutting method is
selectable between partial cut and full cut with a command.
Paper holder
Paper guide
Auto cutter
(CT-P291/CT-P293)
Platen
Thermal head
DIP switch
Auto cutter fixed blade
See 3.4 Setting Paper
See 3.6 Setting DIP Switch
Paper adjust guide