User manual

4 WLAN Setup Tool
48
4-3-3. “Protocol“ Tab
Use the “Protocol“ tab to enable LPR and
the RAW protocol, set the printer timeout
duration, and enable UPnP.
4-3-4. “User Account“ Tab
Use the “User account“ tab to change the
administrator name and password.
Warning
If you forget the new username and password,
settings must be returned to the factory default
settings.
4-3-5. “Maintenance“ Tab
Use the “Maintenance“ tab to restart the
wireless LAN interface board, return the
settings to the factory default settings, and
update the firmware.
Note
After the firmware upgrade starts, do not
disconnect power or transmission to the
printer until the upgrade is complete.