User manual

3 Web Manager

WPS Setting

・ WPS (factory default: Enable)

Select the WPS function setting from Enable and Disable.

Click “Enter” to configure the WPS setting from the Web manager.

・ Mode (factory default: PBC)

Select the mode from PBC and PIN.

For PBC

When “Start” is clicked, the WPS setting of the IF1-WF01 starts. Start the WPS setting of the

access point.

For PIN

In PIN mode, the pin code set at the IF1-WF01 is specified at the access point and then the WPS

setting is started.

・ PIN (factory default: Random Generation)

Select the PIN allocation method from Random Generation and Manually Generation. With

Random Generation, the pin code is generated automatically by the IF1-WF01. With Manually

Generation, the user specifies the PIN code.

When the pin code is set and “Start” is clicked, the WPS starts in PIN mode. At the access point,

specify the pin code and start the WPS setting.

Submit button

Enter the changes.

Reset button

Cancel the changes