User manual

3 Web Manager

3-4-1. General Tab

WLAN board Information

・ WLAN board name (factory default: Net Printer)

Set the ID of the IF1-WF01.

TCP/IP

・ Obtain an IP Address Automatically (factory default)

Automatically obtain the IP address from the DHCP server.

・ Use the following IP Address

Enter IP addresses in the IP Address, Subnet Mask, and Default Gateway fields.

UPnP Setting

・ UPnP (factory default: Enable)

Set the UPnP setting.

Print Settings

Configure the printing functions of the printer.

・ Raw Port Number (factory default: 9100)

Set the TCP port number for RAW protocol printing.

・ Timeout for print data

Set the timeout duration for the connection to the host.

・ Action at Timeout

Select the action for other connections when a timeout occurs with the host. There are two

selections: Close all connections and Move to next connection.

Submit button

Enter the changes.

Reset button

Cancel the changes.