User`s manual

17
1.4 Basic Specications
Printing Method Direct line thermal printing
Printing Speed Max. 100mm/sec
Resolution 203 DPI x 203 DPI
Print width 72mm, 576dot
Character ASCII Character, ALPHA NUMERIC Character,
Extension Character, 18 codepages,
13 international characters
Font Font A (12 x 24 dot), Font B (9 x 17 dot)
Number of columns 48 (Font A), 64 (Font B)
Barcode EAN-8, EAN-13, Code39, ITF, UPC-A, Codabar,
Code93, Code128,
Two-dimension: MAXI Code (CPCL only), QR Code,
PDF-417
Emulation ESC/POS, CPCL, Command Compatible
Driver/SDK Driver: Windows, CUPS
SDK: Windows CE 4.2/5.0/6.0,
Windows Mobile 5.0/6.x, Android
Input Buffer USB interface: 4K bytes
Others: 8K bytes
Sensor Paper End Sensor, Gap Sensor, Cover Open Sensor,
Black Mark Sensor
Paper Paper type Thermal Paper
Width 79.5 ± 0.5mm, 57.5 ± 0.5mm
Thickness Thermal Paper: 65~85μm
Label Paper: 85~150μm
External Diameter Max.
Φ
56mm
Internal Diameter Thermal Paper: 18.5mm or more
Label Paper: 32mm or more
Reliability Thermal Head 50km, 50 million pulses
Battery Continuous printing for 36min
Standby for 19 hours (Bluetooth)
Printing length: 186m
Dropping 1.2m (Printer)
Environmental sealing IP42 (excluding MSR model)