Service manual

CMP-10 Service Manual
CMP-10 Rev. 1.00 P 11/41Date: 2002.07.25
(2) Lift up the Main PCB together with the operational panel.
(3) Disconnect the printer cables and Buzzer cable.
(4) Remove the Main PCB and the operational panel.
(5) Disconnect the Operational panel from the Main PCB.
7. Removing the printer
(1) Unscrew the four screws which are fixing the printer to the plastic case.
(2) Remove the module from the plastic case.
(3) Unscrew the two screws which fix the printer to the plastic carrier.
(4) Pull the printer forward and detach it from the plastic carrier.