Instruction manual

Before Operation

5 System Maintenance Mode

※

1 Native

Normally ‘NativeON’ is used. See the Command Reference for details.

※

2 Feed amount

See the Command Reference for details.

※

3 Command code

Normally ‘CmndSTD’ is used. See the Command Reference for details.

※

4 For adjustable sensor, the voltage setting must be done each time ‘AJSensOF’ is

changed to ‘AJSensON, and vice versa.

※

5 Voltage setting

In the voltage setting, adjust the paper gap and black line adjustment controls

so that the voltages of both ‘PE’ and ‘BL’ displayed on the LCD screen can

read 3.0V to 3.3V.

1. Set the liner (glassine paper) only that has been removed from the label.

(For the black line paper, position the black line so that it does not come to th

e paper sensor.)

2. Set each level to 3.0V to 3.3V with the controls.

Paper gap sensor adjustment control

Black line sensor adjustment control