Troubleshooting guide

60
BARCODE LABELS
Click the Edit Format button to change a line to barcode or create a new
barcode format.
Select the line you would like to have be a barcode and click the Line Type
drop-down box arrow to reveal the line types available.
From the Line Type list click on Barcode
Click on the Barcode Alignment drop-down box arrow and select where on
the label you would like to print the barcode. The default for this selection is
Centered which provides a low density barcode across the entire width of the
label tape. Changing Barcode Width to medium or narrow will print
Barcodes of a higher density.
Selecting Left or Right will place a higher density barcode on either side of
the label tape with a small amount of room for human readable information
on the opposite side. Left and Right barcode label types are NOT available
in High-Speed printing at this time.
The samples below are samples of 2 of the justification types
Click on the Barcode Type Dropdown box and select the barcode symbology
you wish to use. Titan currently supports Interleaved 2 of 5, Interleaved 2 of
5 with Check Digit, Code128 subset C and Code 39.