User`s manual

Printer Operation
38
2

Zebra® Emulation
Mode Settings
[Zebra® Emulation]
Top Menu Sub Menu Default Menu Remarks
Page Setup Print Speed 7 IPS 2 to 7 IPS Printing speed setting.
Print Darkness 12 00 to 30 Adjusting print darkness.
Darkness Adjust
[Darkness Adj]
00 -10 to 10 Fine adjustment of darkness commands.
Continuous Media
Length
[Cont Media Len]
4.00 inch
101.6 mm
0.25 to 32.00 inch
6.4 to 812.8 mm
Setting media length of continuous media.
Lower level = during mm mode.
Vertical Position
[Vertical Pos]
0.00 inch
0.0 mm
-1.00 to 1.00 inch
-25.4 to 25.4 mm
Adjusting printing start position.
Horizontal Shift
[Horizontal Shif]
0.00 inch
0.0 mm
-1.00 to 1.00 inch
-25.4 to 25.4 mm
Adjusting horizontal image position.
Media Sensor See Through See Through
Reect
None
Selecting media sensor.
Small Media
Adjustment
[Small Media Adj]
O On
O
Setting for small media.
Small Media Length
[Small Media Len]
1.00 inch
25.4 mm
0.25 to 1.00 inch
6.4 to 25.4 mm
Setting media length for small media.
Symbol Set PM 50 symbols Setting symbol set.
System Setup Sensor Monitor   Displays level of sensor that is currently
selected.
Sensor Level 1.4 V 0.0 V to 3.0 V Selects threshold of the sensor.
Paper End Level 2.80 V 0.01 V to 3.00 V Sets the paper end level.
Error Reporting
[Error Report]
On Printing On Printing
Immediate
Setting for error report.
Cover Open Sensor
[Cover Sensor]
O On
O
Sets the cover open sensor.
Buzzer Select Exec/Err Exec/Err
All
Error
Key
None
Setting buzzer sounding conditions.
Metric/Inch
[Metric/Inch Sel]
Inch Inch
mm
Sets the units.
Max Media Length
[Max Media Len]
10.00 inch
254.0 mm
1.00 to 50.00 inch
25.4 to 1270.0 mm
Sets the maximum media length.
Settings Lock O On
O
Prevents a command changing the set value.
Keyboard Lock O On
O
Prevents a change by a key operation.
Note: Hold down the Menu Key for at least 4
seconds to enter the Menu Setup Mode when
setting the "On" menu.
Media Power Up O On
O
Selects whether or not to initiate media
measurement when the power in ON.
CI Lock O On
O
Activates/deactivates the CI command.
Emulation Select
[Emulation Sel]
ZPI2 DM4
DMI
DPP
ZPI2
Selects DataMax®/Zebra® compatibility
DM4: DataMax® 400
DMI: DataMax® IClass
DPP: DataMax® Prodigy Plus®
ZPI2: Zebra® 2844Z
Emulation Auto
Detect
[Emulation Auto]
On On
O
Full Auto
Setting emulation (as above) auto detection.