User`s manual

Printer Operation
21
Normal Operating Mode
LED Functions
1
POWER LED
It lights up when printer power is
turned on. (green)
2
ERROR LED
This is lit or ashes when the printer is
in error status. (orange)
Table of Alarm and Error Indications
In addition to normal operating mode, when an abnormal condition is
detected in the printer, an alarm sounds and ERROR LED either lights up or
ashes to indicate the type of error. The LCD indicates the error message.
Item ERROR LED LCD
Printing possible (no error) OFF On Line
Stop or Pause key on operation panel pressed OFF Pause
Head temperature - high temperature abnormality Flashing
Alarm
Head Hot
Head temperature - low temperature abnormality Flashing
Error
Head Cold
PF motor temperature abnormality Flashing
Alarm
PFMotor Hot
Fan motor malfunction Flashing
Error
Fan Lock
Cutter motor temperature abnormality Flashing
Alarm
Cutter Hot
Head open Flashing
Error
Head Open
Paper end Flashing
Error
Paper End
Paper out (paper position undetectable) Flashing
Error
Paper Load
Paper jam Flashing
Error
Paper Jam
Head low resistance value abnormality Flashing
Alarm
Head Check
Communicationerror(receivingbueroverrun) Flashing
Error
Serial Over Run
Communication error (parity) Flashing
Error
Serial Parity
Communication error (framing) Flashing
Error
Serial Framing
Cover open Flashing
Error
Cover Open
*Auto-cutter abnormality (foreign object etc.) Flashing
Error
Cutter Fail
* Applicable only when using the optional auto cutter
POWER ERROR
FEED
STOP
MENU
PAUSE
1
2