User`s manual

Printer Operation
20
2
Normal Operating Mode
When the power is turned on, the printer enters normal operating mode.
The control keys activate the following functions.
POWER ERROR
FEED
STOP
MENU
PAUSE
On Line
Ready
1
2
3
4
1
PAUSE key: Temporarily pauses printing
• Whenthiskeyispushedonce,theLCDindicates"Pause"andthe
printer temporarily pauses.
• Whenitispushedduringprinting,theprinterpausesafterthelabel
currently being printed is issued. Pressing the key a second time
restarts printing and the remaining number of designated labels
are printed.
2
FEED key: Feeds media
• Pressing this keyfeeds media to theprint startposition.The
distance it is fed is determined by automatically detecting the front
end of the media when using label media, and when continuous
media has been designated, a fixed quantity is fed, then feeding
stops.
• WhentheTEAROFFsettingiseffective,feedingstopswhenthe
media has been fed to the TEAR OFF location.
• Whentheoptionalcutterunitisinstalled,themediaisfedtothe
cut position then it is cut.
• Ifthe optional peelerunit isinstalled, themediais fed to the
peeling location. When the media is pausing at the peeling position,
feeding does not occur, even if the FEED key is pushed.
3
STOP key: It stops printing and cancels the alarm
Pushing this key once during printing puts the printer in pause mode
after the label is issued. It is possible to cancel 1 batch of label issuing
data by pressing the STOP key for 4 seconds or longer in pause status.
(The LCD indicates "Job Clear" during cancel.)
4
MENU key:
In normal operation, this key will enter the menu conguration mode.
It can be congured to repeat the previous label, if preferred.
Menu Setup Mode (p.28)
Menu Setup Mode (p.28)