User`s manual

Setup

Connection to a Computer

This product has two interfaces that can be used to receive printing data: a

serial port (RS232C) and a USB port (USB1.1). An optional internal network

interface or parallel interface (IEEE1284, Non-L. P. S.) can be added by your

dealer.

To connect the cable, proceed as follows:

Turn OFF both power switches of the printer and the 1.

computer.

Connect one end of the interface cable to the interface 2.

connector on the back of the printer and secure it with locks

or locking screws, where available.

Connect the other end of the interface cable to the interface 3.

connector on the computer and secure it with locks or

locking screws, where available.

Serial Interface Cable

USB Interface Cable

Note: If an optional parallel interface or network interface is used, the

interface cover is removed from the printer.

Serial Interface (p.53)

USB Interface (p.58)

Connecting the Optional

Interface Board (p.59)