User`s manual
Setup
10
1
Conīrmation of Carton Contents
Removing the Packing Material
The printer is shipped with adhesive tape in place to hold the top cover
closed. Simply remove the two pieces of tape on either side of the top
cover. Then simply open the cover by lifting up and tipping it backwards.
There is another strip of adhesive tape that must be removed which holds
the mechanism closed for shipping. Remove the tape and attached paper
by carefully peeling from the plastic case.
Retain the tape should you need to transport the printer again. A further
piece of packing paper is inside the mechanism and you can remove this
when the head is opened as explained later in the manual.
CD-ROM
Quick-start guide
Media holder barMedia holder guide
Head cleaner
Test label media Power cord
CL-S700DT
Direct Thermal Barcode & Label Printer
U
SER'S
M
ANUAL
Check that the following accessories are included with the
printer in the carton.
Note: The empty carton and packing materials should be stored for
future shipping of the printer.