Service manual

3-40
CD-S500 Series
♦ Precaution when Mounting the Rewinder Motor
• Attach the rewinder motor in an angle so that the cable connecting section will be hidden.
• When the rewinder motor has been mounted on the rewinder motor frame, route the rewinder
motor cable as shown in the figure and secure it with adhesive tape.
♦ Precaution when Mounting the Rewinder Roller Pin
• When mounting the rewinder roller pin on the rewinder motor frame, supply oil to these parts.
Refer to “3-12 Disassembly and Assembly of the Rewinder Unit (For rewinder model only)” and
“♦ Oiling to the Rewinder Unit” (Page 3-41).
Cable connecting section
Adhesive tape
Rewinder motor cable
* The above figure shows a rewinder model.