Service manual

3-39
CD-S500 Series
3-12 Disassembly and Assembly of the Rewinder Unit
(For rewinder model only)
The disassembly procedure is explained mainly. When assembling the parts, follow the disassembly
procedure in reverse.
♦ Removing the Rewinder Motor
1) Remove screws A (2 pcs.), and remove the rewinder motor from the rewinder motor frame.
♦ Removing the Rewinder Gear, Rewinder Roller and Rewinder Roller Pin
1) Remove the rewinder gear, rewinder roller and rewinder roller pin from the rewinder motor
frame.
Rewinder motor frame
Rewinder roller
Rewinder motor
Rewinder roller pin
Rewinder gear
Screw A
Screw M2 × 2.5 (#0)
* The above figure shows a rewinder model.