Service manual

3-22
CD-S500 Series
♦ Removing the Head Cover
1) Remove screws A (2 pcs.), and remove the head cover from the main frame.
* Unhook the projections (2 positions) of the head cover when removing the head cover.
♦ Removing the SA Print Head
1) Remove screws B (2 pcs.), and remove the SA print head from the carriage.
* Remove the print head FPC from the connector.
♦ Removing the Ribbon Mask
1) Remove screw C (1 pc.), and remove the ribbon mask from the carriage.
Screw C
Screw M1.7 × 4 (#0) (B TITE)
Screw A
Binding head screw M2 × 4
Screw B
Binding head screw M3 × 8 (P TITE)
SA print head
Carriage
Connector
Print head FPC
Head cover
Ribbon mask
Main frame
Projections