Service manual

3-19
CD-S500 Series
♦ Removing the SA Front Cover Switch
1) Remove screw A (1 pc.), and remove the SA front cover switch from the base frame.
♦ Removing the Main PCB
1) Remove screws B (4 pcs.), and remove the main PCB from the base frame.
♦ Precaution when Mounting the SA Front Cover Switch
• When mounting the SA front cover switch on the base frame, fit the boss into the
corresponding hole for positioning.
♦ Precaution when Mounting the Main PCB
• Check that the power switch securely fits into the slot on the base frame.
Base frame
SA front cover switch
Main PCB
Screw B
Binding head screw M3 × 5
Screw A
Screw M1.7 × 6 (#0)
Boss
Hole for boss
* The above figure shows a standard model.
Power switch
Slot