Service manual

3-3
CD-S500 Series
3-4 Disassembly and Assembly of AC Adapter Case
(Built-in AC Adapter Type)
The disassembly procedure is explained mainly. When assembling the parts, follow the disassembly
procedure in reverse.
♦ Removing the AC Adapter
1) Remove screws A (2 pcs.) and screws B (2 pcs.), and remove the AC adapter case from the
chassis.
2) Remove screws C (4 pcs.), and remove the hanger support from the AC adapter case.
3) Remove the AC adapter from the AC adapter case.
4) Pull the AC adapter cable connector out of the connector on the printer.
♦ Precaution when Mounting the AC Adapter
• When mounting the AC adapter on the AC adapter case, route the AC adapter cable through
three bosses in a zigzag pattern in the AC adapter case.
Screw C
Binding head screw M3 × 8 (P TITE)
Connector
AC adapter case
Hanger support
Boss
Screw A
Pan head screw M3 × 8 (S TITE)
Connector
AC adapter cable
AC adapter
Screw B
Pan head screw M3 × 14 (P TITE)
* The above figure shows the standard model with built-in AC adapter.