Operator`s manual

52
Getting started
Parking and locking
Turning off engine
왘 Place the gear selector lever in
position P.
Turning off engine with the SmartKey
왘 Turn the SmartKey in the starter switch
(
컄 page 31) to position 0 and remove
it.
The immobilizer is activated.
왘 Press the seat belt release button
(
컄 page 41).
왘 After exiting the vehicle press the lock
button
‹ on the SmartKey
(
컄 page 30).
The locking knobs on the doors move
down. The turn signal indicators light
up briefly.
For more information, see “Locking and
unlocking” (
컄 page 86).
i
Always set the parking brake in addi-
tion to shifting to position P.
On steep slopes, turn the front wheels
towards the curb.
i
The SmartKey can only be removed
from the starter switch with the gear
selector lever in position P.
!
With the SmartKey removed and the
driver’s door open, a warning sounds if
the vehicle’s exterior lamps are not
switched off.
Warning! G
To prevent possible personal injury, always
keep hands and fingers away from the door
openings when closing the doors. Be espe-
cially careful when small children are
around.
Before closing doors, make sure that there
is no possibility of someone getting caught
in a door during closing.
Warning! G
When leaving the vehicle, always remove the
SmartKey from the starter switch and lock
the vehicle. Do not leave children unattend-
ed in the vehicle, or with access to an un-
locked vehicle. Unsupervised use of vehicle
equipment may cause an accident and/or
serious injury.