Operator`s manual

36
Getting started
Adjusting
왘 Turn the SmartKey in the starter switch
to position 1 or 2.
or
왘 Press the KEYLESS GO* start/stop
button once or twice.
or
왘 Open the respective driver’s or passen-
ger door.
Seat height
왘 Press the switch up or down in the di-
rection of arrow 2.
Seat cushion tilt
왘 Press the switch up or down in the di-
rection of arrow 3 until your upper legs
are lightly supported.
Seat cushion depth
왘 Press the switch forward or backward
in the direction of arrow 4 until your
legs are supported comfortably.
Seat fore and aft adjustment
왘 Press the switch forward or backward
in the direction of arrow 5.
Adjust to a comfortable seating posi-
tion that still allows you to reach the
accelerator/brake pedal safely. The
position should be as far to the rear as
possible, consistent with ability to
properly operate controls.
Seat backrest tilt
왘 Press the switch forward or backward
in the direction of arrow 6 until your
arms are slightly angled when holding
the steering wheel.
i
When moving the seat, be sure that
there are no items in the footwell or be-
hind the seats. Otherwise you could
damage the seats.