Operator`s manual

345
Practical hints
Battery
2 Positive terminal
3 Negative terminal
Disconnecting the battery
왘 Turn off all electrical consumers.
왘 Open the trunk lid (컄 page 95).
왘 Remove the battery cover 1.
왘 Detach negative terminal 3 of battery
with 10 mm open-end wrench from the
vehicle tool kit.
왘 Remove cover from the positive
terminal 2.
왘 Detach the positive terminal of the bat-
tery with the 10 mm open-end wrench.
Removing the battery
왘 Remove the screw securing the bat-
tery.
왘 Remove the battery support and
bracket.
왘 Take out the battery.
Charging and reinstalling battery
왘 Charge battery in accordance with the
instructions of the battery charger
manufacturer.
왘 Reinstall the charged battery. Follow
the previously described steps in re-
verse order.
Reconnecting the battery
왘 Turn off all electrical consumers.
왘 Connect the positive lead and fasten its
cover 2.
왘 Connect negative lead 3.
Warning! G
Never charge a battery while still installed in
the vehicle. Gases may escape during charg-
ing and cause explosions that may result in
paint damage, corrosion or personal injury.
!
Never invert the terminal connections.
!
The battery, its filler caps and the vent
tube must always be securely installed
when the vehicle is in operation.