Operator`s manual

336
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Tail lamp assemblies
1 Turn signal lamp (white socket)
2 Tail, parking, standing, and side marker
lamp (red socket)
3 Tail lamp, rear fog lamp (red socket)
4 Backup lamp (black socket)
왘 Switch off the lights.
왘 Open trunk.
왘 Turn the catch, and move the trim to
the side.
왘 Turn bulb socket counterclockwise and
pull out.
왘 Gently twist bulb counterclockwise and
pull out of bulb holder.
왘 Insert new bulb into the holder and turn
it clockwise.
왘 Reinstall bulb socket.
The bulb socket should audibly click.
왘 Replace trim and secure with lock.
License plate lamp
1 Screws
왘 Switch off the lights.
왘 Loosen both screws 1 and remove
lamp.
왘 Replace the tubular lamp and reinstall
it.
왘 Retighten the screws.