Operator`s manual

335
Practical hints
Replacing bulbs
Parking and standing lamp bulb
왘 Switch off the lights.
왘 Open the hood (컄 page 263).
왘 Press the tab on cover 2 and remove
cover.
왘 Pull out the bulb socket 5 with the
bulb.
왘 Pull the bulb out of the bulb socket.
왘 Insert a new bulb in the socket.
왘 Reinstall the bulb socket.
왘 Press cover 2 onto the housing until
the tab engages.
Side marker lamp bulb
왘 Switch off the lights.
왘 Carefully slide lamp towards rear.
왘 Remove front end first.
왘 Twist bulb socket counterclockwise
and pull out.
왘 Pull bulb out of the bulb socket.
왘 Insert new bulb in socket.
왘 Reinstall bulb socket, push in and twist
clockwise.
왘 To reinstall lamp, set rear end in
bumper and let front end snap into
place.