Operator`s manual

354
Practical hints
Replacing bulbs
Rear lamps Notes on bulb replacement 앫 Only use 12 volt bulbs of the same type
and with the specified watt rating.
앫 Switch lights off before changing a bulb
to prevent short circuits.
앫 Always use a clean lint-free cloth when
handling bulbs.
앫 Your hands should be dry and free of oil
and grease.
앫 If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Center.
앫 Have the LEDs and bulbs for the follow-
ing lamps replaced by an authorized
Mercedes-Benz Center.
앫 Additional turn signal lamps in the
exterior rear view mirrors
앫 High mounted brake lamp
앫 Bi-Xenon lamps*
앫 Front fog lamps
Lamp Type
8 Brake lamp LED
9 Turn signal lamp PY 21 W
a Tail and standing
lamp, side marker
P 21/4 W
b Backup lamp P21W
c License plate lamps C5W
d Tail lamp, Rear fog
lamp
P 21/4 W
e High mounted brake
lamp
LED
Warning! G
Keep bulbs out of reach of children.
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Halogen lamps contain pressurized gas. A
bulb can explode if you:
앫 touch or move it when hot
앫 drop the bulb
앫 scratch the bulb
Wear eye and hand protection.
Because of high voltage in Bi-Xenon lamps,
it is dangerous to replace the bulb or repair
the lamp and its components. We recom-
mend that you have such work done by a
qualified technician.