Operator`s manual

290
Operation
Tires and wheels
왘 Press the reset button on the instru-
ment cluster (
컄 page 22).
The following message will appear in
the multifunction display:
CHECK CURRENT TIRE PRES.?
왘 Press æ button.
The following message will appear in
the multifunction display:
TIRE PRES. MONITOR REACTIVATED
The tire inflation pressure monitor will
now monitor the tire inflation pressure
values of all four tires.
Afterward, the following message will
appear in the display:
TIRE PRES. DISPLAY
APPEARS AFTER
DRIVING A FEW MINUTES
This display appears until the individual
inflation pressure values are matched
with the tires. The individual values are
then displayed (
컄 page 287).
If you wish to cancel activation:
왘 Press ç button.
If one of the following messages appears in
the multifunction display:
앫 TIRE PRES. MONITOR
REACTIVATE AFTER
CORRECTING PRESSURE!
앫 TIRE PRES.
PLEASE CORRECT!
왘 Check the tire inflation pressures and
correct them if necessary.
왘 Reactivate the tire inflation pressure
monitor.
i
If you are transporting a deflated tire in
the vehicle, do not activate the tire
inflation pressure monitor until
앫 the deflated tire is no longer in the
vehicle
앫 you have inflated the tire to the cor-
rect pressure