Operator`s manual

161
Controls in detail
Control system
After entering the vehicle, the steering
wheel and seat will move into the position
stored in memory when:
앫 the driver’s door is closed
앫 you put the SmartKey in the starter
switch
앫 press and hold the appropriate stored
position button on the memory switch
(
컄 page 121)
왘 Move the selection marker with
the æ or ç button to
the
CONVENIENCE submenu.
왘 Press button j or k repeatedly
until you see this message in the dis-
play:
EASY-ENTRY FEATURE ACTIVATE .
The selection marker is on the current
setting.
왘 Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for the
easy-entry/exit feature:
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
i
To cancel seat/steering wheel move-
ment, do one of the following:
앫 Press seat adjustment switch
(
컄 page 35)
앫 Move the steering column stalk
(
컄 page 37)
앫 Press the memory button
(
컄 page 121)
STEER. COL. Only the steering
column is moved.
ST. COL + SEAT Both the steering
column and the
seat are moved.
OFF The easy-entry/ex-
it feature is deacti-
vated.