Specifications

Etigam BRIGHT-CHEQ Biological Indicator Monitoring System
BRIGHT-CHEQ Incubator Operation Manual
8
LOADING PAPER
1. To remove the printer cover, grasp the protrusion at the rear of the cover and lift up.
2. If the printer is turned o, switch it on.
3. Press the SEL button until the SEL light is o.
4. Hold the paper roll such that the paper unwinds towards you from the bottom of the roll.
5. With scissors, cut the end of the paper at an angle towards the roll from right to left (see
Figure 2).
Figure 2. End of paper with proper tail for feeding
6. Insert the end of the paper into the slot at the rear of the printing mechanism (see Figure
3) and press the LF button until approximately 5 or 6 cm of paper feeds through the
mechanism.
7. Pull the black paper holder outward and insert the paper roll (see Figure 3).
Figure 3. Loading the paper roll
8. Pass the end of the paper through the slot on the printer cover, and mount the cover.
 To remove the paper roll, remove the printer cover, pull the black paper holder outward,
lift the roll, and slowly pull the end of the paper out of the printing mechanism.
INSTALLATION