Specifications

BRIGHT-CHEQ Incubator Operation Manual
Etigam BRIGHT-CHEQ Biological Indicator Monitoring System
19
SETTING THE ETIGAM BRIGHTCHEQ BI LOT NUMBER
Cell Menu
Setup Cell Menu
Lot # Menu
1. From the Main Menu, touch the key representing
the desired cell to enter its CellMenu.
2. From the CellMenu, touch the SETUP key to enter
the SetupCellMenu.
3. From the SetupCellMenu, touch the LOT# key to
set the Etigam BRIGHT-CHEQ lot number. Enter the
three digit numerical portion of the Etigam BRIGHT-
CHEQ lot number (the “S-” lot number prex should
not be entered). Use the ARROW keys to move the
cursor position, if necessary. To save and return
to the SetupCellMenu, touch the ENTER key. To
return to theSetupCell Menu without modifying
the Etigam BRIGHT-CHEQ lot number, touch the
CANCL key.
4. If cell conguration is complete, touch the BACK
key to return to the CellMenu, then touch the BACK
key again to return to the MainMenu.
SETTING THE STERILIZATION CYCLE NUMBER
Cell Menu
Setup Cell Menu
Sterilizer # Menu
1. From the MainMenu, touch the key representing
the desired cell to enter its CellMenu.
2. From the CellMenu, touch the SETUP key to enter
the SetupCellMenu.
3. From the Setup Cell Menu, touch the STER#
key to set the sterilization cycle number. Using
the keypad that appears on-screen, enter up to
three alphanumeric characters representing the
sterilization cycle number. Use the ARROW keys to
move the cursor position, if necessary. To save and
return to the Setup Cell Menu, touch the ENTER
key. To return to the Setup Cell Menu without
modifying the sterilization cycle number, touch the
CANCL key.
4. If cell conguration is complete, touch the BACK
key to return to the Cell Menu, then touch the
BACK key again to return to the MainMenu.
CONFIGURATION - CELL SETTINGS