Instruction manual

Chapter 2 Before Measurement (Meter SET)
16 HORIBA
Chapter 2 Before Measurement (Meter SET)
This chapter explains the procedures of the instrument condition setting, which should be
performed before measurement.
2.1 Meter SET Screen
2.2 Auto Hold Setting
1. Tap and tap Meter SET.
Meter SET items are displayed.
You will see the remaining items by dragging.
2. Select items and set the conditions.
The setting procedures for each item are
explained below.
1. Change the auto hold settings, tap on the
right of the AUTO HOLD item.
2. Tap on the right of the HOLD TYPE item.
3. Select the measurement stability condition of
the 6 types (EXACT, NORMAL, BRIEF, TIME,
CUSTOMIZE, Manual) in the AUTO HOLD
selection screen.
To cancel the operation, tap to return to the
previous screen.
In the AUTO HOLD mode, the instrument judges
potential stability automatically to the
measurement values. This instrument allows
you to select one among the 6 type criteria of
potential stability.