Instruction manual

Chapter 9 Data
F-72 89
Chapter 9 Data
The DATA screen allows you to check and delete saved measurement data, check the
calibration data, save data into a USB memory, and delete all measurement and
calibration data.
9.1 Measurement data_All
9.2 Deleting Saved Data
1. Press the DATA key to display the DATA screen.
1. Tap on the right of the Measured data_All
item.
One item of measured data is displayed in one
line. Data can be checked by dragging the item
in order. 100 items of data can be viewed on 1
page.
2. Tap to check other pages.
The next 100 items are displayed.
3. Tap of the each data to check details of the
data.
4. Flick on a detailed data screen, and the
previous/next detailed data screen is displayed.
1. Tap on a detailed data screen.
"DELETE" is displayed under the ID number.
2. Tap to return the Measured data_All
screen.
"del" is indicated as the ID of the data to be
deleted.
3. After that, tap to execute deletion.
To execute, tap . Not to execute, tap .
You can search saved data by measurement
item, operator, or sample name.
Data can be deleted selectively.