User`s manual

VIII. CABLE CONNECTION

1. CHANNEL A

RJ-45 Modular Type Cable Information

Please use the straight LAN cable (shielded type) which is generally sold.

RS422/485 Shielded Twisted Pair

Conductor: AGW24

Characteristic impedance: < 100 ohms

Capacitance per meter: 40 - 100 pF

Attenuation at 1Mhz / 100m: 2 - 6 db

Cable length: max. 1200 m

Connectors and Connector Shells: Ideally use: EMI / RFI Shielding RJ45 type

About Ground

Each ECR must be grounded at the same level and the termination resistors must be fitted on the first and last

devices on the line. Please refer to the document "IRC & TERMINAL PRINTER CABLING INSTRUCTION

(RS485)" for how to connect cables.

Joint Box

JOINT BOX 485 (REF.# 62092) makes the cable connection simple, quick, and easy between ECRs and

Terminal Printers on an IRC line (RS485). Refer to the option instruction manual for details and connection

samples.

1 2 3 6 1236 12345 12345

DATA+ DATA- CTL+ CTL-

RJ45 with shiled

1 P.GND 2 DATA+ 3 DATA- 4 CTL+ 5 CTL

ECR channel A

RJ45 modular type connector with shield

1KΩ termination resistor (1KΩ)

220Ω termination resistor (220Ω)

To ECR (ch-A)

To slip printer

TP-822/832 (RJ45)

9-way male D-sub connector

To slip printer TP-620 (D-sub)

To Network Adapter NA-720 (MASTER)

To Network Adapter NA-710/730 for slip

printer CBM-1000

1KΩ

220Ω

1KΩ 220Ω