User`s manual

19
V. PC COMMUNICATION
Following functions can be done with a PC through either one of channel B;
Refer to VIII. Cable Connection (page 28).
1. BATCH COMMUNICATION
For details about PC batch communication, refer to the PROTOCOL MANUAL UCP-101 and a
separate appendix.
REMOTE MEMORY CHANGE
By remote memory change, PC can modify the memory contents of ECR. This function consists of
the following three types;
a) Memory Change
Alters ECR's memory contents, by designating the memory address.
b) Memory Management
Alters the contents of PLU, Group, Cashier, R.PLU, Quantity discount tables, % rate, Foreign currency
exchange rate and Adjustment rates.
c) Date/Time Change
Sets the date and time from PC.
REMOTE MEMORY DUMP
By remote memory dump, PC can read the memory contents of ECR.
a) X/Z Report Dump
The X/Z report dump is similar to X/Z report of ECR. Using this function, PC can collect or reset
individual ECR's data.
b) Consolidated X/Z Report Dump from Master ECR
c) Complete Memory Dump
Collects ECR's complete memory data from PC. This is used mainly for making a back-up file of ECR
memory on PC.
COMMAND TRANSFER
A PC orders to a master ECR to consolidate and download data by a command which is connected to
master ECR via channel B (RS232C). When master ECR receives a command from PC, master ECR
performs the following jobs using IRC line;
a) Programming Transfer
All programming, Rates, PLUs, Groups, R.PLUs, Quantity discount tables, Cashiers, PLU pending price
file and PLU lock/unlock file.
b) IRC Report
Auto full transaction, Hourly, Grand total 1, Cash in drawer, Cashier, Groups, PLU, PLU stock, Track
(not consolidated), R.PLU and Quantity discount.
c) IRC Flash Report
Transaction, Grand total 1, Cash in drawer, Cashier, Groups, PLU, PLU stock. These flash 'read only'
reports can be issued anytime on the master only in the X key position.