User`s manual

8
IV. PERIPHERALS
1. SLIP PRINTERS
Refer to VIII. Cable Connection (page 25).
Following printers are available.
Model Connected to
TP-822/832 (dot/thermal printer, roll paper) channel A
TP-620 (dot printer, slip paper) channel A
CBM-1000 (thermal printer, roll paper) channel A via NA-710/730
channel B
TM-T88III (thermal printer, roll paper) channel B
1) TP-822/832 (connected to ch-A)
ECR SETTINGS
a) Program the following flags;
[SF-83.h] [1] with slip printer
[SF-87.a,b] [0,1] slip printer selection : TP-822/832
[SF-88.a,b,c] slip printed on which printer
[SF-89.a] baud rate for IRC line: [1] 38400 bps, [0] 19200 bps
The character structure for IRC line has already been fixed on ECR.
(1 start bit, 8 data bits, 2 stop bits, even parity)
b) See [SF-83 ~ 87] for other selections, such as time print, logo print, automatic slip print, etc.
TERMINAL PRINTER SETTINGS
Refer to TP-800 SERIES TERMINAL PRINTER PROGRAMMER'S MANUAL.
paper outlet
power switch
power LED
FEED switch