User`s manual
CBM-292/293 User’s Manual
29 CITIZEN
5. DIP SWITCH SETTING
The DIP switch(DS1) is located on the back of the main body. When setting the switch, turn off the power for the main body.
If the setting is changed with the power turned on, it will not become valid.
DIP Switch
Function ON OFF
Setting upon
Shipment
DS1- 1 Auto cutter Yes No ON
2 CR switching LF operated Ignored OFF
3 Printing density Standard Dark OFF
4 DTR-DSR/XON-XOFF
XON
−
XOFF DTR
−
DSR
OFF
5 Interface OFF
6
″
OFF
7
″
OFF
8
″
See the table below
OFF
Interface
DS1-8
DS1-7
DS1-6
DS1-5
Parity
Baud Rate
(bps)
OFF OFF OFF OFF Parallel input
−
−
OFF OFF OFF ON Serial input None 1,200
OFF OFF ON OFF
″
″
2,400
OFF OFF ON ON
″
″
4,800
OFF ON OFF OFF
″
″
9,600
OFF ON OFF ON
″
″
19,200
OFF ON ON OFF
″
Odd 1,200
OFF ON ON ON
″
″
2,400
ON OFF OFF OFF
″
″
4,800
ON OFF OFF ON
″
″
9,600
ON OFF ON OFF
″
″
19,200
ON OFF ON ON
″
Even 1,200
ON ON OFF OFF
″
″
2,400
ON ON OFF ON
″
″
4,800
ON ON ON OFF
″
″
9,600
ON ON ON ON
″
″
19,200
The main body has been preset with jumpers upon shipment.
Jumper
Domestic Spec. International Spec.
J1 Open Short
J2 Open Short
J3 Open Short
J4 Short Short
J5 Short Short
J6 Short Short
J7 Short Short
J8 Short Short
292(OFF)
1. Domestic Specifications
•
International characters : Japan
•
Kanji : JIS code
•
Auto loading function
•
Input buffer : 3 KB
•
Serial communication bit length : 8 bits
2. International Specifications
•
International characters : U.S.A.
•
Auto loading function
•
Input buffer : 3 KB
•
Serial communication bit length : 8 bits
* The DS1-4 is invalid if parallel input is specified.
* The DS1-1 results in an error if set to ON in case of the CBM-292.