Operating instructions

— vii —
WARNING
Never handle the printer in the following manners, as it may break, become out
of order, or overheat causing smoke and resulting in fire or electric shock. If
the printer is used in an abnormal condition, such as when broken, then
problems, smoke emission, abnormal odor/noise, and fire can result. If an
abnormal condition exists, be sure to disconnect the power plug from a plug
socket, and contact our dealer. Never repair the printer on your own - it is very
dangerous.
Do not allow the printer to receive a strong impact or shock, such as kicking,
stomping, hitting, dropping, and the like.
Install the printer in a well-ventilated place. Do not use it in such a manner
that its ventilation port will be blocked.
Do not install the printer in a place like a laboratory where chemical reactions
are expected, or in a place where salt or gases are contained in the air.
Do not connect/disconnect a power cord or a data cable, while holding the
cable. Do not pull, install, use, or carry the printer in such a manner that force
will be applied to the cables.
Do not drop or insert any foreign substances, such as clips or pins, into the
printer.
Do not spill any liquid or spray any chemical-containing liquid over the printer.
If any liquid is spilled on it, turn off the power, disconnect the power cable and
power cord from the plug socket, and so on, and contact our dealer.
Never disassemble or remodel the printer. Negligence of this may cause fire
or electric shock.
Use the printer only with the specified commercial power supply and AC
adapter. Negligence of this may result in fire, electric shock, or problems.
If you drop or break the AC adapter, or if water or the like gets inside it, unplug
it immediately from the socket and contact your dealer.
Do not damage, break, process, bend/pull by force, twist, or printing head an
AC adapter cord. Also, do not put a heavy substance on it or heat it. The AC
adapter cord could be broken, resulting in fire, electric shock, or trouble. If the
AC adapter cord is damaged, contact our dealer.
Do not connect/disconnect the AC adapter with wet hands.
Do not overload a single electrical outlet, using a table tap or a current tap
socket.
The printer packing bag must be discarded or kept away from children. A child
can suffocate if the bag is placed over the printing head.