Operating instructions

— 46 —
10.2 Command Details
10.2.1 Descriptions of Each Item
XXXXX
[Function]
[Code]
Command Function
A sequence of code constituting a command is represented
in hexadecimal number for < >H, binary number for < >B,
and decimal number for < >, respectively; [ ]k represents a
repeat count of k-times.
Describes an argument value (Setting range) for the
command.
Describes a command outline.
Describes a caution as required.
Describes an initial value for the command when
accompanied by an argument.
Describes the associated commands for use.
Describes a coding example in the BASIC sample program.
*This example is only for your reference and differs
depending on the language used, version, and so on. For
details, see the manual for the language used.
Shows a print result obtained by running the above-
mentioned program. However, the print result shown here
has a different scale from the actual print result.
Represents the command.
[Range]
[Outline]
[Caution]
[Default]
[See Also]
[Sample Program]
[Print Result]
XXXX