Operating instructions

— 21 —

CAUTION:

• If the paper roll is still slack, rewind the paper to remove the slack.

• If the paper roll is tilted, raise the head-up lever to correct the paper roll position, or

pull out the paper roll and set it again.

• Do not open the printer cover while printing.

• Do not hold or press the paper roll while printing, because it could cause a paper

jam.

• After the paper is set, the printer is made ready to start printing. Note that if data is

remaining in the buffer, the printer will start printing after the paper is set.

• Do not run the printer with its cover removed, because it could cause

malfunctioning or an irregularity of the sensor.

Put back the head-up lever. The paper roll is automatically pulled in by the platen

roller to feed a constant amount of paper. (When auto-loading is enabled.)

Put back the printer cover.