Operating instructions

— 20 —
Make sure that the power is turned on.
Pull the head-up lever to this side to raise up the printing head.
If there is still some paper remaining after a paper-out indication, eliminate the
paper roll according to “4.8 How to Remove Remaining Paper Roll.”
Insert the front end of the paper roll straight into a paper insertion slot.
Set the paper roll firmly in the paper holder.
4.7 Inserting the Paper
CAUTION:
• Be sure to use the specified paper roll.
• Use of non-specified paper may not guarantee the print quality, printing head life,
and so on.
Hold the convexity on the rear of the printer cover, and raise it upward.
Cut the front end of the paper roll almost at a right angle.
CAUTION:
• The printer cover is not stationary (Opening/Closing). After detaching it, be careful
not to lose or break it.
• Do not insert a ragged or dog-eared end of the paper roll, because it could result in a
paper jam or insertion error.
2
1
3
4
5
6
7
Good Good Good No Good No Good No Good