Operating instructions

— 12 —

4.2.2 Installing the Battery Pack

With the labeled side of battery pack facing up, connect the battery

connecter.

Insert the battery pack into the battery compartment.

(Tuck the battery connecter tidily in the extra space of the compartment.)

Place the battery cover back over the compartment by sliding it from the

back of the printer. (Exercise care not to bite the battery leads.)

Be sure to install the battery cover after the battery pack is replaced.

Label

CAUTION:

• When connecting or disconnecting the battery connecter, be sure to hold the

connector shells. Never pull the battery leads.

• Do not give the battery pack a severe jolt or drop on a hard surface.

• To prevent the battery pack from bulging, heat build-up, or bursting, never use any

battery pack other than the supplied battery pack.

• Never remove the battery pack from the printer and use it for driving any other

device. Such a practice may cause damage to the battery pack or the target device.

• Be sure to install the battery cover after the battery pack is replaced.

Battery pack

Battery connecter