Operating instructions
— 92 —
GS ^ n1 n2 n3
[Function]
[Code]
[Range]
Executing the macro
<1D> H <5E> H <n1> <n2> <n3>
0 ≤ n1 ≤ 255
0 ≤ n2 ≤ 255
0 ≤ n3 ≤ 1
Executing contents defined in macro.
• “n1–n3” indicate as follows:
n1: The number of times of macro execution
n2: Waiting time on macro execution
Waiting time of n2 x 100 msec is given for every
execution.
n3: Macro execution mode
n3
0
1
Mode
Continuous execution
Execution by FEED switch
Continuous execution: The Macro is executed n1 times
continuously at the time intervals
specified by n2.
Execution by FEED S: After waiting for lapse of time
specified by n2, the ALAME LED
flickers and the FEED switch switch is
waited to be pressed. When it is
pressed, the macro is executed once.
This action is repeated n1 times.
• When this command is received while in macro definition,
suspension of macro definition is indicated. At this time,
the defined content is cleared.
• No execution takes place when macro is held undefined or
n1=0.
• While in macro execution with n3=1, paper feed with the
FEED switch is not available.
Initially, this command is not specified.
GS :
See Sample Program and Print Results for GS :.
[Outline]
[Caution]
[Default
[See Also]
[Sample Program]
[Print Results]