Operating instructions

— 85 —
[Function]
[Code]
[Range]
[Outline]
Selecting the printing position of HRI characters
<1D> H <48> H <n>
0 ≤ n ≤ 3
• Selecting printing position of HRI characters in printing bar
codes.
• “n” means the followings.
The visible code refers to the bar code-turned characters so
that you can read them.
The visible code is printed in the font selected with GS f.
Specify before the GS k command.
n = 0
GS f
LPRINT CHR$ (&H1B) ; "3" ; CHR$ (5) ;
LPRINT CHR$ (&H1D) ; "h" ; CHR$ (50) ;
LPRINT CHR$ (&H1D) ; "H" ; CHR$ (0) ;
GOSUB *BC
LPRINT CHR$ (&H1D) ; "H" ; CHR$ (1) ;
GOSUB *BC
LPRINT CHR$ (&H1D) ; "H" ; CHR$ (2) ;
GOSUB *BC
LPRINT CHR$ (&H1D) ; "H" ; CHR$ (3) ;
GOSUB *BC
END
*BC :
LPRINT CHR$ (&H1D) ; "k" ;
LPRINT CHR$ (4) ;
LPRINT "12" ; CHR$ (0) ;
LPRINT CHR$ (&HA) ;
RETURN
n
0
1
2
3
Printing Position
No printing
Above the bar code
Below the bar code
Both above and below the bar code
GS H n
[Caution]
[Default]
[See Also]
[Sample Program]